Tire Review Magazine

MAY 9, 2024

Florida Pneumatic Manufacturing Corporation released the AirCat 6420 1/4” and AirCat 6410 3/16” Air Hydraulic Riveter. Meanwhile, the 1/4” and AirCat 6410 3/16” Air Hydraulic Riveter features 2,000 LB of pull force and is designed to handle both 5/32” and 3/16” steel and aluminum structural rivets, as well as 3/16” Monobolts.

Hydraulics 52

Hydraulics Manufacturing IT 52

Tire Review Magazine

MAY 9, 2024

Florida Pneumatic Manufacturing Corporation released the AirCat 6420 1/4” and AirCat 6410 3/16” Air Hydraulic Riveter. Meanwhile, the 1/4” and AirCat 6410 3/16” Air Hydraulic Riveter features 2,000 LB of pull force and is designed to handle both 5/32” and 3/16” steel and aluminum structural rivets, as well as 3/16” Monobolts.

Hydraulics 52

Hydraulics Manufacturing IT 52

Tire Review Magazine

JANUARY 24, 2025

Fitting ceramic brake pads during a customers next service visit will ensure the best stopping power possible, while also helping to extend the life of the other components of the braking system, especially when using brake parts designed to work together like ADVICS brake pads, rotors, hydraulics and brake fluid. Sponsored by Advics.

Hydraulics 98

Hydraulics Vehicle Manufacturing Management 98

Tire Review Magazine

JANUARY 20, 2025

Technical Benefits of the PL-6000DCX Parking Lift The PL-6000DCX uses an overhead power unit and a direct-drive hydraulic cylinder. The post BendPak unveils new two-post lift that doubles parking capacity appeared first on Tire Review Magazine. These features improve reliability and reduce maintenance costs, BendPak said.

Hydraulics 52

Hydraulics Technical Vehicle Trucking 52

Tire Review Magazine

NOVEMBER 4, 2024

Whether you’re servicing a pickup truck with active dampeners and air ride or a luxury sedan with hydraulic dampeners, these systems have faced their fair share of criticism from technicians over the years. Active shocks and struts can change compression and rebound on the fly using hydraulic, magnetic, or air-ride systems.

Vehicle 52

Vehicle Hydraulics Manufacturing Trucking 52

Tire Review Magazine

JANUARY 20, 2025

Technical Benefits of the PL-6000DCX Parking Lift The PL-6000DCX uses an overhead power unit and a direct-drive hydraulic cylinder. The post BendPak unveils new two-post lift that doubles parking capacity appeared first on Tire Review Magazine. These features improve reliability and reduce maintenance costs, BendPak said.

Hydraulics 52

Hydraulics Technical Vehicle Trucking 52

Tire Review Magazine

SEPTEMBER 9, 2024

Both systems use the ABS hydraulic control unit (HCU), which consists of an electronic module, hydraulic modulator, and pump. Initially, ABS was concerned only with wheel speeds and pressure levels within the hydraulic modulator. appeared first on Tire Review Magazine. Both ABS and ESC use similar sensors.

Hydraulics 98

Hydraulics Electronics Oil Change Vehicle 98

Tire Review Magazine

MARCH 4, 2025

Maintaining hydraulic jacks and lifts is crucial for shop safety and efficiency. Learn why checking, flushing, and replacing hydraulic fluid with the correct jack oil can extend the life of your equipment and prevent costly failures. The post The Importance of Jack Oil Maintenance appeared first on Tire Review Magazine.

Hydraulics 52

Hydraulics 52

Tire Review Magazine

FEBRUARY 6, 2025

9-12 : Brooksville, FL Advanced Tire Service Specializations Advanced Hands-On Earthmover Tire Service (ETS) The ETS 200 level program covers advanced procedures, service truck operation, hydraulic tool usage, and servicing three- and five-piece wheels on and off machines. 2 : Youngstown, OH (Women’s Only) Dec.

Retail 52

Retail Trucking Hydraulics Technical 52

Tire Review Magazine

JANUARY 6, 2024

The Advanced Earthmover Tire Service 200 level class offers specialized training in service truck operation, equipment lifting, hydraulic tool operation, and more. The Advanced Farm Tire Service training focuses on service truck operation, equipment lifting, and hydraulic tool operation. Key dates and locations for CTS Inst.

Retail 98

Retail Hydraulics Trucking Manufacturing 98

Tire Review Magazine

FEBRUARY 6, 2025

9-12 : Brooksville, FL Advanced Tire Service Specializations Advanced Hands-On Earthmover Tire Service (ETS) The ETS 200 level program covers advanced procedures, service truck operation, hydraulic tool usage, and servicing three- and five-piece wheels on and off machines. 2 : Youngstown, OH (Women’s Only) Dec.

Retail 52

Retail Trucking Hydraulics Technical 52

Tire Review Magazine

JANUARY 6, 2024

The Advanced Earthmover Tire Service 200 level class offers specialized training in service truck operation, equipment lifting, hydraulic tool operation, and more. The Advanced Farm Tire Service training focuses on service truck operation, equipment lifting, and hydraulic tool operation. Key dates and locations for CTS Inst.

Retail 90

Retail Hydraulics Trucking Manufacturing 90

Tire Review Magazine

DECEMBER 4, 2023

Have a certified lift specialist inspect cables, pulleys and pins and check for troublesome hydraulic leaks. The post How to Maintain Tire Equipment During the Winter appeared first on Tire Review Magazine. An ounce of prevention now saves major equipment repairs down the road.

Hydraulics 97

Hydraulics Mechanic Vehicle IT 97

Tire Review Magazine

DECEMBER 4, 2023

Have a certified lift specialist inspect cables, pulleys and pins and check for troublesome hydraulic leaks. The post How to Maintain Tire Equipment During the Winter appeared first on Tire Review Magazine. An ounce of prevention now saves major equipment repairs down the road.

Hydraulics 97

Hydraulics Mechanic Vehicle IT 97

Tire Review Magazine

OCTOBER 22, 2024

When you hit the brake pedal on most internal combustion vehicles, hydraulic pressure is generated by the master cylinder and sent to the calipers. The hydraulic pressure causes the calipers to clamp down on the brake pads and rotor. It is not until the last few miles per hour that the hydraulic brakes are engaged.

Hydraulics 52

Hydraulics Vehicle Electric Vehicles IT 52

Tire Review Magazine

OCTOBER 22, 2024

When you hit the brake pedal on most internal combustion vehicles, hydraulic pressure is generated by the master cylinder and sent to the calipers. The hydraulic pressure causes the calipers to clamp down on the brake pads and rotor. It is not until the last few miles per hour that the hydraulic brakes are engaged.

Hydraulics 52

Hydraulics Vehicle Electric Vehicles IT 52

Tire Review Magazine

AUGUST 14, 2024

If you work on brakes in your shop, you should be familiar with basic hydraulics and the components that make up the hydraulic portion of the brake system. The master cylinder is the heart of the braking system because it converts the driver’s pedal force into hydraulic pressure that activates the brakes.

Hydraulics 52

Hydraulics Vehicle Management Car 52

Tire Review Magazine

AUGUST 14, 2024

If you work on brakes in your shop, you should be familiar with basic hydraulics and the components that make up the hydraulic portion of the brake system. The master cylinder is the heart of the braking system because it converts the driver’s pedal force into hydraulic pressure that activates the brakes.

Hydraulics 52

Hydraulics Vehicle Management Car 52

Tire Review Magazine

FEBRUARY 26, 2024

Hybrids prioritize using regenerative braking, so the pedal acts more like an input to the ABS module requesting braking force rather than a direct hydraulic pressure request. Under normal operation, hydraulic brake pressure comes from the ABS module’s electric pump motor, not the driver’s foot, providing a consistent pedal feel.

Hydraulics 52

Hydraulics IT Electricity Education 52

Tire Review Magazine

FEBRUARY 26, 2024

Hybrids prioritize using regenerative braking, so the pedal acts more like an input to the ABS module requesting braking force rather than a direct hydraulic pressure request. Under normal operation, hydraulic brake pressure comes from the ABS module’s electric pump motor, not the driver’s foot, providing a consistent pedal feel.

Hydraulics 52

Hydraulics IT Electricity Education 52

Tire Review Magazine

DECEMBER 11, 2023

When diagnosing a pull due to uneven hydraulic pressure, pressure gauges are your best friend for figuring out hydraulic issues by comparing brake line pressures precisely. Pressure gauges will read the brake lines and can be used to directly measure hydraulic pressure.

Hydraulics 52

Hydraulics Troubleshooting IT 52

Tire Review Magazine

MAY 6, 2024

Strategic investments, such as the recent hydraulic hose plant in Mexico, highlight Continental’s proactive approach to optimizing distribution strategies and enhancing customer proximity. The post AMN Drivetime with ContiTech Group’s Cal Ganda appeared first on Tire Review Magazine.

Hydraulics 40

Hydraulics Consulting Manufacturing Engineering 40

Tire Review Magazine

MAY 6, 2024

Strategic investments, such as the recent hydraulic hose plant in Mexico, highlight Continental’s proactive approach to optimizing distribution strategies and enhancing customer proximity. The post AMN Drivetime with ContiTech Group’s Cal Ganda appeared first on Tire Review Magazine.

Hydraulics 40

Hydraulics Consulting Manufacturing Engineering 40

Tire Review Magazine

JUNE 17, 2024

First, it must hold the vehicle on an incline and second, stop it within a specific distance if the hydraulic brakes fail. These brakes have to reliably hold a vehicle on an incline and serve as a crucial backup if the hydraulic brakes fail. The parking or emergency brake has two crucial functions.

IT 52

IT Hydraulics Vehicle Transportation 52

Tire Review Magazine

JUNE 17, 2024

First, it must hold the vehicle on an incline and second, stop it within a specific distance if the hydraulic brakes fail. These brakes have to reliably hold a vehicle on an incline and serve as a crucial backup if the hydraulic brakes fail. The parking or emergency brake has two crucial functions.

IT 52

IT Hydraulics Vehicle Transportation 52

Tire Review Magazine

MARCH 25, 2024

The post TIA’s Advanced Farm Tire Service training to take place in June appeared first on Tire Review Magazine. When you explain the risks in person and then show them how to service farm tires safely, it has a positive effect on safety.”

Hydraulics 40

Hydraulics Trucking Technical IT 40

Tire Review Magazine

MARCH 7, 2024

It also features an electric/hydraulic power system, a single operator stand to release the pneumatic safety locks from a safe distance, locks that disengage when the lift lowers automatically and multiple locking positions. The post BendPak releases new SP-7XE Series of full-rise scissor lifts appeared first on Tire Review Magazine.

Hydraulics 52

Hydraulics Vehicle Trucking Electricity 52

Tire Review Magazine

MARCH 7, 2024

During normal braking, the pressure from the master cylinder passes through the Hydraulic Control Unit (HCU) unaltered. The wheel may start to turn as a result, but if the wheel doesn’t begin rotating, the outlet or dump valve opens to release the hydraulic pressure holding the wheel.

Hydraulics 52

Hydraulics Preventative Maintenance Electronics Vehicle 52

Tire Review Magazine

NOVEMBER 6, 2023

Another problem can be mechanical issues with the Hydraulic Control Unit – they’re rare, but they can happen. The post How to Diagnose Anti-Lock Brake System Issues appeared first on Tire Review Magazine. Instead of activating the ABS module and causing long stops, the system will deactivate, and the ABS warning light will turn on.

Hydraulics 59

Hydraulics Mechanic Vehicle IT 59

Tire Review Magazine

AUGUST 8, 2024

BendPak adds that the 12APX Series is backed by the company’s 5-2-1 warranty, which provides five years of coverage on the lift structure, two years on the hydraulic cylinder(s) and power unit, and one year on other components, labor, and freight charges.

Hydraulics 52

Hydraulics Trucking Electric Cars Vehicle 52

Tire Review Magazine

AUGUST 8, 2024

BendPak adds that the 12APX Series is backed by the company’s 5-2-1 warranty, which provides five years of coverage on the lift structure, two years on the hydraulic cylinder(s) and power unit, and one year on other components, labor, and freight charges.

Hydraulics 52

Hydraulics Trucking Electric Cars Vehicle 52

Tire Review Magazine

OCTOBER 17, 2024

The ABS hydraulic control unit’s pressure sensors, along with wheel speed, lateral acceleration, and yaw sensors, all work together to paint a picture of the vehicle’s braking behavior. The post How brake pedal position sensors work appeared first on Tire Review Magazine.

Hydraulics 52

Hydraulics Electric Vehicles Engineering Vehicle 52

Tire Review Magazine

OCTOBER 17, 2024

The ABS hydraulic control unit’s pressure sensors, along with wheel speed, lateral acceleration, and yaw sensors, all work together to paint a picture of the vehicle’s braking behavior. The post How brake pedal position sensors work appeared first on Tire Review Magazine.

Hydraulics 52

Hydraulics Electric Vehicles Engineering Vehicle 52

Tire Review Magazine

OCTOBER 24, 2024

The AP Pro Series is backed by the BendPak 5-2-1 Warranty, offering five years of coverage on the lift structure, two years on the hydraulic cylinder(s) and power unit, and one year on other components, labor, and freight charges. The post BendPak introduces AP Pro Series lifts appeared first on Tire Review Magazine.

Electricity 52

Electricity Hydraulics Trucking Manufacturing 52

Tire Review Magazine

SEPTEMBER 19, 2024

This results in areas where hydraulic pressure drops as they pass by the caliper. The post Understanding brake pulsation and judder appeared first on Tire Review Magazine. Rotors are designed with two friction surfaces that should be parallel within a set specification. This can also affect braking distances.

Hydraulics 52

Hydraulics IT Vehicle 52

Tire Review Magazine

SEPTEMBER 19, 2024

This results in areas where hydraulic pressure drops as they pass by the caliper. The post Understanding brake pulsation and judder appeared first on Tire Review Magazine. Rotors are designed with two friction surfaces that should be parallel within a set specification. This can also affect braking distances.

Hydraulics 52

Hydraulics IT Vehicle 52

Tire Review Magazine

MARCH 6, 2024

Weak sales of hydraulic hoses for construction equipment and other applications, undermined by sluggish demand, offset North American sales growth in automotive hoses. increase in 2023 sales revenue appeared first on Tire Review Magazine. Business volume in hose & couplings was basically unchanged from the previous year.

Hydraulics 52

Hydraulics Management Trucking Vehicle 52